DIY: How to Make a Prefect Paracord Dog Collar (20 Semple Tips)

This guide will walk you through the process of crafting a custom paracord dog collar, step-by-step. So, grab your supplies and get ready to weave some canine coolness!

How to Make Paracord Dog Collar

This video tutorial will guide you in making your own paracord dog collar. These DIY dog collars made from paracord are so simple and engaging to create. And the best part is that you only need to learn a basic, beginner friendly knot for it!

Benefits of a Paracord Dog Collar

• Durability: Paracord’s inbuilt strength means that the collar will hold up to daily wear and tear, even energetic dogs.
• Lightweight: Although really tough, paracord also is very light in weight, offering your dog a comfortable fit.
• Customization: Paracord of different colors is available to match your dog’s style.
• Multiple Sizes: Different from the pre-made collars, paracord lets you adjust the size in order to securely fit your dog’s neck.
• Water Resistance: Paracord dries quickly hence it is ideal for dogs who enjoy outdoor activities.

Check Out This Video Tutorial:

Instructions:

Step 1: Find what you need

Gather your supplies and materials.

Step 2: Set up your paracord dog collar

Cut two 6 foot lengths of paracord from both colors. Place a lighter BBQ over the ends of both wires for around 3 seconds.
(If your ends of paracord are already pre-melted, simply cut them off before doing this.)

Immediately and cautiously lace the melted cord ends together until they cool down.
This gives about 12 feet of paracord.

Insert the free end of the cord through the buckle opening from one side. Shove the buckle through the cord and push it toward the loop which is already fused together.
Roll the loose cords over the loop and pull the cords tight. Making the cords fasten on the hook.

Pull the loose cord ends through the other side of the buckle.

Take the buckle and place it in such a way that the loose cord (male end as for us) will be at the top.
Note down the length of the shirt collar from tip to tip. Either you measure your dog’s existing collar or their neck size and add 1 inch to get accurate measurements.

Be sure to include only one side of the buckle in your measurement.

As soon as the top buckle is pulled to make the center loops the right length, attach the top buckle to your working surface with the aid of an adhesive tape.
Finally, organize the laid cords on either side of the tied cords in the middle. These would be your working cables.

Step 3: Make fishtail knots

This collar is of fishtail knot type.
In order to begin this particular knot put the unfastened cord (green, for us) under the stationary green cord.

Pass this cord through and across the two left cords, which are blue in our case. Close to the buckle, push it up to the top.

Now place the original blue loose left cord under the stationary left blue cord.

Draw the blue cord through and to the right, above the green cord that is still in place.

Now, move the loose blue cord back over to the left, passing it over the left (blue) and under the stationary cord on the right (green).

Move the loose green cord (which is still in the upper left) over the stationary green and under both blue cords.
Make sure to press the knots up toward the buckle as you work.

Draw the loose green back over the left (blue) and under the right stationary cord (green).

Repeat this pattern all the way down the collar, alternating colours until you reach the buckle.
For the final knot, you’ll only finish half of the pattern, leaving one slack cord on each side.

Step 4: Finish off the paracord collar

Turn the collar over and snip one of the loose cords, about 1/2 inch from the knot.

Hold the BBQ lighter over the loose end of the cord for approximately 3 seconds to melt it.

Use the lighter’s side to press the cord end into the center of the collar.

Use the lighter to fuse and melt the two ends of the loose cord together after cutting the other one. Make sure to keep your fingertips away from the hot, melting ends.

Slide the d-ring onto the collar, with the flat end facing inside.

Your paracord dog collar is now complete!

Final Thought

• Your dog can wear the finished collar once all the parts are firmly in place. Not only does the personalized collar give a unique touch, but it’s also much less expensive than store-bought alternatives because to its custom fit and color customization.
• For convenient leash attachment, a D-ring can be attached near the buckle for pets who enjoy hiking or other outdoor activities. Nonetheless, in order to avoid snagging, the D-ring can be removed for dogs who walk through thick undergrowth.
• This methodical procedure guarantees that your pet’s new paracord collar is fashionable and useful, prepared for any adventure.

In Summery

We explored the nuances of making a paracord dog collar with this thorough tutorial, showing that it is not only feasible but also satisfying to combine functionality and style.

The process of choosing the appropriate materials, measuring and readying the paracord, braiding, and adding the finishing touches shows how simple it is to create a long-lasting accessory for your pet. This method not only adds a personalized touch, but it also demonstrates the strength and adaptability of paracord, demonstrating its value beyond its intended applications.

FAQ,s